B
CONNECT CABLE ADJUSTER TO STAINLESS STEEL CABLE.
•
This is to attach the adjuster if you have installed the
rudder from a kit.
•
Slide end of webbing through slider buckle. Thread the
webbing through the loop in the stainless steel rudder
cable. Fold or “pinch” webbing to make a V. Re-thread
webbing through slider buckle.
C
CABLE LENGTH ADJUSTMENT
•
To shorten cable length, pull on tab of webbing with loop;
to lengthen, lift tab of ladder-lock buckle.
Feathercraft
K-Light Classic
25
Slider buckle
Fold webbing to
make a V
Ladder-lock buckle
Tab with loop
K-Light_Classic_English 11/5/07 9:20 AM Page 25
