6
REPEAT STEPS #2 TO #5 TO ASSEMBLE THE STERN SECTION OF
THE FRAME.
7
UNROLL THE KAYAK SKIN.
Note: The rudder bracket is permanently attached to the stern
end of the kayak.
8
SLIDE BOW FRAME SECTION INTO THE BOW SECTION OF THE SKIN
•
(The end with the Feathercraft logo is the bow.)
•
Velcro tabs are attached to the center of the inside of the
hull. Open the tabs.
•
Insert the frame section as far as it will go, snug to the
end. Use a “slide, lift” motion. Reaching through hatches
is also helpful to pull the frame into place.
•
Repeat with the stern frame section.
•
Wrap velcro closures around keel bars.
Feathercraft
K2 Expedition Double
11
K2English_Coaming.xpr 1/18/06 9:38 AM Page 11
