TO REPAIR/REPLACE SPONSON
The sponsons can be completely removed from the sleeve sewn
to the inside of the skin. Turn the skin inside out. The sponson
chamber is open at bow and stern ends. Tie a long string
through the hole in the tab at each end of sponson. Pull spon-
son through the center opening of the chamber (where sponson
hose is attached). To reinstall, pull the cord attached to the new
sponson back through the chamber. Ensure sponson is not
twisted in the chamber. Urethane glue and patches are included
in the repair kit. Duct tape works well on the sponsons.
STORAGE
Once clean and dry, the kayak can be stored assembled or
disassembled in a shaded, dry place. When storing the kayak
disassembled, take extension bars apart.
Feathercraft
Khatsalano
6
KhatsEnglish_Coaming.xpr 9/11/07 2:24 PM Page 6