10
ROLL OUT SKIN.
Note: rudder bracket is permanently attached to the stern end
of the kayak skin.
•
The bow end has the Feathercraft logo.
•
Have the velcro tab closures on the inside of the hull
“open” before sliding the frame sections into the skin.
•
Slide completed bow and stern frame sections into skin.
•
Center the keel bar along the keel strip of the skin.
•
Once frame is centered into skin, wrap velcro tabs around
keel tubes.
Feathercraft
Klondike
18
Stern
Bow
Note: During additional assembly steps, re-check that the
frame has remained centered in the skin.
KlondikeEnglish.xpr 7/27/05 4:33 PM Page 18
