IMSS E3265
- 14 -
3.
Set the shelf on to the brackets and place the bracket retainer clip into slots on shelf. .
4.
Push shelf light cords into plastic shelf cord retainer clip located on inside of shelf bracket.
5.
Remove the cap from the appropriate female light sockets.
6.
If the socket is not being used for a shelf light, the cap must be plugged into socket to prevent
contamination and moisture out of the socket.
7.
Plug in each shelf light by aligning the male pins on the appropriate shelf light cord plugs
with the female light sockets and push together. IMPORTANT: Do not roll plug during
insertion.
8.
Place extra cord into cord clip as shown to keep it out of the way.
9.
Removal of shelving is performed by following steps in reverse order.
