9
Installation and Maintenance Instructions
Model E1 Intercom Station
Unpacking the Product
After unpacking the product, examine it for damage that may have
occurred in transit. If it has been damaged, do not attempt to install
or operate it. File a claim immediately with the carrier, stating
the extent of the damage. Carefully check all envelopes, shipping
labels, and tags before removing or discarding them. Disposal
of all shipping materials must be carried out in accordance with
national and local codes and standards. If any parts are missing,
please call Federal Signal Customer Support at
+1 708-534-4756 or +1 877-289-3246.
Mounting and Wiring the Model E1
The Model E1 ECHO intercoms are designed for mounting on
a flat horizontal or vertical surface. Four installer-supplied M10
bolts are required. For mounting dimensions, see Figure 1.
Figure 1 Dimensions
290A7476
M8 SCREWS (12)
192 mm (7.55 in)
270.9 mm (10.66 in)
235 mm (9.25 in)
254 mm (10.0 in)
140 mm (5.52 in)
286 mm (11.25 in)
