4
Federal Signal
signaling.fedsig.com
Supported Protocols
The FT200C-V Telephone with Keypad supports:
•
SIP (Session Initiation Protocol)
•
HTTP Web-based configuration
•
Provides an intuitive user interface for easy system configuration and verification of FT200C-V Telephone with
Keypad operations.
•
DHCP Client
• Dynamically assigns IP addresses in addition to the option to use static addressing.
•
TFTP Client
•
Facilitates hosting for the autoprovisioning configuration file.
•
RTP
•
Facilitates autoprovisioning configuration values on boot.
•
Audio Encodings
•
PCMU (G.711 mu-law)
•
PCMA (G.711 A-law)
•
G722.1 (Siren7)
•
G722.2 (AMR-WB)
•
G729.1 (G729J & G729EV)
Supported SIP Servers
As a SIP device, this product will operate with most IP PBX servers.
Installation
The Voice-over-IP (VoIP) FT200C-V Telephone is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way
communications device that easily connects into existing local area networks (LANs) with a single cable connection.
Figure 1 illustrates how the FT200C-V Telephone can be installed as part of a VoIP phone system.
Figure 1 Typical VoIP Installation
