6
Federal Signal
signaling.fedsig.com
•
Choose a wall location that is free of obstructions and permits space for conduit runs.
•
Ensure that mounting can support 7 lb (3.2 kg) and any additional foreseeable load.
To install the telephone:
1.
Separate the faceplate from the housing.
2.
Use the template provided or the enclosure itself to locate and drill holes for mounting screws.
3.
Secure the unit to the wall with user-supplied 1/4
"
or M8 screws.
4.
Bring the Network cable into the enclosure through the conduit entrance and plug into the RJ-45 connector on the
PCBA. See Figure 4.
Figure 4 Wiring
Figure 5 Circuit Board
