9
Federal Signal
signaling.fedsig.com
Network Connectivity and Data Rate
When you plug in the Ethernet cable or power supply, the square, green Link light above the Ethernet port indicates that
the network connection has been established. (See Figure 8.) The Link light changes color to confirm the auto-negotiated
baud rate:
•
This light is yellow at 10 Mbps.
•
It is orange at 100 Mbps.
Verify Network Activity
The square, yellow Activity light blinks when there is network activity.
Figure 8 Network Activity
Reset Switch
When the telephone is operational and linked to the network, use the Reset Test Function Management (RESET) switch
(Figure 9) on the Telephone board to announce the Telephone’s IP Address, and verify that the audio is working. The
message comes through the handset receiver.
Figure 9 RESET Switch
