Federal Signal Corporation IPX-PBL1 Installation Instructions Download

Page: 3 / 4

Mounting Instructions for Viper

EXT and IMPAXX

Lightheads

IPX-PBL1 Mounting Bracket Kit

Figure 2 IPX600 lighthead secured to mounting bracket

#10 TYPE B SCREWS (4)

HARDWARE INCLUDED

WITH THE LIGHTHEAD

USE 0.201" HOLE

FOR IPX600

Figure 3 Viper

EXT

lighthead secured to mounting bracket

#10 TYPE B SCREW (4)

#8 SCREW SUPPLIED
WITH LIGHTHEAD (2)

USE OUTER 0.116" HOLES
FOR VIPER EXT.

VIPER EXT LIGHTHEAD

290A6205B

Mount the lighthead and bracket assembly to the surface with the #10 Type B screws.

Repeat steps 1 through 5 for the other side.

Connect the IMPAXX or Viper EXT lightheads as described in the instructions provided with the

lightheads.

Summary of Contents for IPX-PBL1

Page 1: ...uctions packed with related products for additional precautions and information File these instructions in a safe place and refer to them when maintaining or reinstalling the product Failure to follow...

Page 2: ...icle components All drilled holes should be de burred and all sharp edges should be smoothed All wire routings going through drilled holes should be protected by a grommet or convolute split loom tubi...

Page 3: ...IPX600 Figure 3 Viper EXT lighthead secured to mounting bracket 10 TYPE B SCREW 4 8 SCREW SUPPLIED WITH LIGHTHEAD 2 USE OUTER 0 116 HOLES FOR VIPER EXT VIPER EXT LIGHTHEAD 290A6205B 5 Mount the lighth...

Page 4: ...ization number RMA number To expedite the process please be prepared with the following information Your Federal Signal customer or account number The purchase order number under which the items were...