Installation Instructions for the IPX-ROW1
Rear Opera Window Mounting Kit
2562642A REV. A 612
Safety Message to Installers and Users of Warning Light Equipment
People’s lives depend on your proper installation and servicing of our products. It is important to read,
understand, and follow all instructions shipped with this product. In addition, listed below are some other
important safety instructions and precautions you should follow:
• To properly install this light, you must have a good understanding of automotive electrical procedures
and systems along with proficiency in the installation and use of safety warning equipment.
• DO NOT install equipment or route wiring in the deployment path of an airbag.
• When drilling into a vehicle structure, be sure that both sides of the surface are clear of anything that
could be damaged.
• In order for the light to function properly, a separate ground connection must be made. If practical, it
should be connected to the negative battery terminal. At a minimum, it may be attached to a solid metal
body or chassis part that will provide an effective ground path as long as the light system is to be used.
• Locate the light control so the VEHICLE and CONTROL can be operated safely under all driving
conditions.
• If a vehicle seat is temporarily removed, verify with the vehicle manufacturer if the seat needs to be
recalibrated for proper airbag deployment.
• Do not attempt to activate or deactivate the light control while driving in a hazardous situation.
• You should frequently inspect the light to ensure that it is operating properly and that it is securely
attached to the vehicle.
• File these instructions in a safe place and refer to them when maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death.
Overview
This publication contains instructions for using the IPX-ROW1 Opera Window Mounting Kit to mount one
warning light to each rear opera window on the Chevrolet
®
Caprice.
Unpacking the Warning Light
After unpacking the kit, inspect it for damage that may have occurred in transit. If it has been damaged, file
a claim immediately with the carrier, stating the extent of damage. Carefully check all envelopes, shipping
labels, and tags before removing or destroying them. If you are missing any parts (Table 1), contact Customer
Support at 1-800-264-3578, 7 a.m. to 5 p.m., Monday through Friday (CT).
Table 1 Kit contents
Qty. Description
Part No.
4
Screw, #10-32. TORX
®
, Black
7000447-10
4
Screw, #8, Type B, Yellow
7011069-08
4
Screw, #6-32, Tri-Lobe, Black
7011249-04
2
Bracket, Opera Window
8613212
