14
14
Model MB1 LED Message Board
Federal Signal
www.fedsig.com
Setting Configuration Options
Setting Configuration Options
All Message Board settings and options are configured through various menus accessed
through the numeric keypad and LCD screen of the control head while it is operational.
There are two menus, Standard and Secure, that allow different information to be viewed
and configuration options to be set. To prevent unwanted access and changes to the
system, the Security Menu is accessible only with a numeric Fleet Password created by
the installer during installation of the Message Creation software. For more information,
see “Fleet Password and Security” on page 15.
To navigate menus, use the up/down arrows, or simply press the number associated with
that menu. If you do not press a key within 15 seconds, the menu times out and returns to
normal operation.
The Standard Menu has these menu items:
0. Adjust Keypad Backlight Level
1. Adjust LCD Contrast Level
2. View Date & Time
3. View Control Head Firmware Version
4. View Message Sign Firmware Version
5. Enter Security Menu
6. Update Messages via USB Flash Drive
7. Exit Standard Menu
The Security Menu has these menu items:
0. Change Date
1. Change Time
2. Adjust Message Board Intensity
3. Reset Fleet Password
4. Update Control Head Firmware
5. Exit Security Menu