Valor
®
Light Bar Hook-On Mounting Kit Manual
2
Valor Hook-On Mounting Kit
Federal Signal
www.fedsig.com
Table 1 Kit contents
Qty.
Description
Part No.
1
Foot Assembly, Mounting, LH
8651119
1
Foot Assembly, Mounting, RH
8651120
1
Bracket, Hook Attach, LH
8651121
1
Bracket, Hook Attach, RH
8651122
2
Retainer, Nut
8583490
2
Nut, 5/16-18, Flange,
7065078
4
Screw, #10 Type B, Pan Torx, SS Black
7011246-08
10
Lockwasher, 5/16-inch SS
7074A020
10
Nut, 5/16-18, Steel, HCR
7059125
The items above are installed on new ligemblht bars at the factory.
4
Bracket Assembly, Adj. Foot
8652124
4
Pad, Mounting
8572029
8
Washer, 5/16-inch, Black SS
7072234
8
Lockwasher, 5/16-inch, SS Black
7074A020-01
8
Screw,5/16-18, Pan Torx, SS Black
7000434-10
4
Screw, #10 Type B, Pan Torx, SS Black
7011246-08
2
Grommet, Split
228128
2
Cable Tie
150A109
HEAVY OBJECT: Use lifting aids and proper lifting techniques when removing or replacing this
product. Failure to heed this warning may cause personal injury.
Installing the Service Kit Mounting Feet
ENSURE PROPER INSTALLATION OF MOUNTING FEET: Before installing the mounting feet and
hook attach bracket, note that the LH foot and bracket is for the left side of the light bar and the RH
foot and bracket for the right side. Failure to follow this precaution may damage the light bar.
The Service Kit requires the assembly of the mounting feet on the light bar. If you are installing a new light bar
with the mounting feet already assembled, see "Installing the Adjustable Foot Brackets" on page 4. New
light bars may require that you loosen the 5/16-inch nuts to adjust the positions of the mounting feet on the
vehicle roof. Before installing the light bar, plan all cable routing.
To install the Service Kit mounting feet:
1.
To avoid marring the plastic domes, invert the light bar on soft rags or cardboard.
2.
Install a mounting foot assembly and a hook-attach bracket on the Valor using the 5/16-18 nuts and
lockwashers. Tighten the nuts only enough to hold the mounting foot assembly in place. See Figure 1.
