Valor
®
Low-Profile Hook Mount Manual
2
Valor Low-Profile Hook Mount Kit
Federal Signal
www.fedsig.com
Table 1 Kit contents
Qty.
Description
Second Item No.
4
Screw, #10, Type B, Pan-Head Torx
®
, Steel
7011246-08
12
Nut, 5/16-18, High-Corrosion Resistant
7059125
2
Nut, Flange 5/16-18, High-Corrosion Resistant
7065078
12
Washer, Flat, Stainless Steel, 0.344 x 3/4 x 0.050 inch
7072A031
12
Lockwasher, Split 5/16 inch Screw, Stainless Steel.
7074A020
2
Retainer, Nut, Arjent/Vista
8583490
1
Foot, Low, LH, Valor, (Left)
865101872
1
Foot, Low, RH, Valor, (Right)
865101873
1
Bracket, Low, Hook Attach, LH, Valor (Left)
865101874
1
Bracket, Low, Hook Attach, RH, Valor (Right)
865101875
The items above are factory-installed on new light bars.
Qty.
Description
Second Item No.
8
Screw, Machine, 5/16-18, Torx. Steel
7000434-14
4
Screw #10, Type B, Pan-Head, Torx, Steel
7011246-08
8
Washer, Flat, Stainless Steel, 0.344 inch, .0.563 inch outer diameter
7072234
8
Lockwasher, Split, 5/16 inch
7074A020-01
4
Mounting Pad
8572029
4
Valor Low Hook Adjuster Assembly
865101876
1
Keeper Plate Kit
8583193
Installing the Service Kit Mounting Feet
HEAVY OBJECT: Use lifting aids and proper lifting techniques when removing or replacing the
light bar. Failure to follow this warning may cause personal injury.
HOOK ATTACH BRACKET RETAINER NUTS: Torque the two 5/16 in nuts that retain the hook-
attach bracket to the mounting foot to 16-24 in-lb only. See Figure 2 on page 4.
PROPER MOUNTING FEET INSTALLATION: Before installing the mounting feet and hook-attach
bracket, note that the LH foot and bracket are for the left side of the light bar, and the RH foot
and bracket are for the right side. Failure to note this difference may damage the light bar.
The service kit requires the assembly of the mounting feet on the light bar. If you are installing a new
light bar that is shipped with the mounting feet already assembled, see "Installing the Adjustable Foot
Brackets" on page 4. New light bars may require that you loosen the 5/16-inch nuts to adjust the
positions of the mounting feet on the vehicle roof. Before installing the light bar, plan all cable routing.
To install the mounting feet:
