Valor
®
Low-Profile Hook Mount Manual
3
Valor Low-Profile Hook Mount Kit
Federal Signal
www.fedsig.com
1.
To avoid marring the plastic domes, invert the light bar on soft rags or cardboard.
2.
Install a mounting foot assembly and a hook-attach bracket on the Valor using the 5/16-18 nuts and
lockwashers. Tighten the nuts only enough to hold the mounting foot assembly in place. See Figure 1.
Figure 1 Service kit mounting foot installation
Foot, Low, RH, Valor
Nut Retainer
5/16-18 Flange Nut
Hook Attach
Bracket, RH
5/16-inch Nuts, Lockwashers,
And Flat Washers
#10 Torx Type B
Pan head Screws
Airtab
®
(2)
5/16-18 Machine Screw
3.
Use a nut retainer and two #10 Type B pan head Torx® screws to trap the 5/16-18 flange nut on the
backside of the hook-attach bracket.
4.
Repeat Steps 2 and 3 with the other mounting foot assembly.
