- 16 -
CLEANING INSTRUCTIONS
Daily Cleaning
The case should be cleaned thoroughly, as described in the weekly cleaning section, before it is
used for the first time.
NOTICE:
Avoid splashing or soaking any electrical components with water to
prevent electrical damage to the case.
NOTICE:
Shut off lights and power switches and remove all product from case.
Allow sufficient time for the unit to reach room temperature before
proceeding with cleaning.
NOTICE:
Remove all product from case before proceeding with cleaning
procedure.
Note: For major spills or foreign material buildup use complete weekly cleaning instructions.
1.
Clean all foreign materials from the door opening.
2.
Wipe complete interior of case using a damp cloth.
3.
Tilt the front glass forward as described in the illustrations below. This will allow easier
access to clean interior front and side glass. The glass can then be cleaned with common
window cleaners.
OPEN FRONT GLASS:
1. Stand in front of unit and grab the pull
handle with both hands.
2. Pull front glass outward until the glass
rests on front glass stops.
CLOSE FRONT GLASS:
1. Stand in front of unit and push on front
of pull handle with both hands.
2. Firmly push glass towards rear of unit
until front glass rests in closed position
4.
The remaining exterior surface should be wiped down using any soapy warm water.
Note: Do not use detergents or chlorine and do not use abrasive cleaners or pads to prevent
scratching of surfaces.
Summary of Contents for ECGR50
Page 29: ...29...
