IMSS E3265
- 22 -
Daily Cleaning
The case should be cleaned thoroughly, as described in the weekly cleaning
section, before it is used for the first time.
NOTICE:
Avoid splashing or soaking any electrical components with
water to prevent electrical damage to the case.
NOTICE:
Shut off lights and power switches and remove all products
from case. Allow sufficient time for the unit to reach room
temperature before proceeding with cleaning.
NOTICE:
Remove all products from the case before proceeding with
cleaning procedure.
NOTICE:
Acrylic air deflector requires special washing procedures to
prevent hazing and yellowing of material. Clean as described
in “Acrylic Air Deflector Cleaning” section of this manual.
Note: For major spills or foreign material buildup use complete weekly
cleaning instructions.
Note: Detergents are not recommended and do not use abrasive cleaners or
pads to prevent scratching of surfaces.
1. Dip rag in warm soapy water and ring out thoroughly. Wipe complete interior
of case and dry with soft dry towel.
2. The remaining exterior surface should be wiped down using any ammoniated
cleaners or soapy warm water and dried with soft dry towel.
3.
IMPORTANT: Cleaning the clear acrylic plastic front air deflector. Clean
as described in “Acrylic Air Deflector Cleaning” section of this manual
.
Weekly Cleaning
NOTICE:
Avoid splashing or soaking any electrical components with
water to prevent electrical damage to the case.
NOTICE:
Shut off lights and power switches and remove all products
from case. Allow sufficient time for the unit to reach room
temperature before proceeding with cleaning.
NOTICE:
Remove all products from case before proceeding with
cleaning procedure.
NOTICE:
Acrylic front air deflector requires special washing procedures
to prevent hazing and yellowing of material.
Note: Detergents are not recommended and do not use abrasive cleaners or
pads to prevent scratching of surfaces.