Page 32 of 40
(16)
SERVICE INFORMATION
CAUTION:
RISK OF ELECTRIC SHOCK!!!
DISCONNECT POWER BEFORE SERVICING UNIT!!!
Before any service work is performed on the case, make sure all power is disconnected to the
case.
Service problems or request for repair parts from authorized service agencies, trained service personnel, or
owners should be referred to:
CUSTOMER SERVICE DEPARTMENT
Federal Industries
215 Federal AVE
Belleville, WI 53508
Toll Free: (800) 356-4206 / WI Phone (608) 424-3331
Fax: (608) 424-3234
16.1
PRE-SERVICE CHECKLIST
You may avoid the cost and inconvenience of an unnecessary service call by first reviewing this checklist of
frequently encountered situations that can cause unsatisfactory case performance.
CAUTION:
Before servicing case, turn off power at the main breaker of fuse box.
16.1.1
Case does not operate
Check for disconnected power supply.
Check for tripped breaker or blown fuse.
Check that power switch is on.
16.1.2
Lights do not operate
Check that light switch is on.
Shelf light: Check that shelf light cords are tight in the sockets
16.1.3
Case temperature too warm (product is exceeding 41°F)
Check that the cold air inlet and outlet slots are not blocked.
If supplied with rear door option be sure that the rear doors are closed and tightly sealed
Check fo
r blocked or dirty condenser coil fins and clean them (see “
” page
