Federal SN48, Installation & Operation Instructions

Series ’90 Non-Refrigerated Bakery

Page 3

INTRODUCTION

Thank you for purchasing a Federal Industries display case.  This manual contains important 
instructions for installing and servicing the Series ’90 Non-Refrigerated Bakery Cases.  A repair 
parts list and wiring diagram are also included in the manual.  Read all of these documents 
carefully before installing or servicing your case. 

REGISTRATION & SERIAL NUMBER 

 
It’s important to keep a record of the model and serial number of your merchandiser for warranty and 
part identification.  Please write them here for your quick reference. 
 

Register your product online!

   Visit our website at 

www.federalindustries.com

 and register your 

product today. 
 
 

Case Model___________________________Serial Number_________________________ 

 
We’re here to provide you with the best possible experience with your new product, however, we cannot 
cover everything about your merchandiser in this manual, so if you have any additional questions or 
issues, please see the SERVICE INFORMATION PAGE to find who you should contact. 

NOTICE 

Read this manual before installing your case.  Keep this manual and refer to it before doing any 
service on the equipment.  Failure to do so could result in personal injury or damage to the case. 

NOTICE 

Installation and service of the electrical components in the case must be performed by a licensed 
electrician. 
 

The portions of this manual covering electrical components contain technical instructions intended only 
for persons qualified to perform electrical work. 

DANGER 

Improper or faulty hookup of electrical components in the case can result in severe injury or death. 
 
All electrical wiring hookups must be done in accordance with all applicable local, regional, or 
national standards.