Series ’90 Refrigerated Bakery
Page 6
Removing Packaging Material
Remove the brackets that held the case to the shipping skid.
Remove the plastic ties that hold the wire shelves and shelf brackets in place.
Remove the shipping tape that secures the doors and lift-up glass. If it is necessary to
remove tape residue from plastic materials, use cleaning compounds recommended in the
cleaning section of this manual.
Leveling the Case
The case must be level for proper drainage of defrost condensate to the condensate
evaporator.
Four (4) leg levelers are provided for leveling the case. The leg levelers can be turn in and
the case can be placed with the base frame on the floor.
The leveled case must be sealed to the floor using and NSF listed Sealant.
Refrigeration Installation
Self-Contained Models
The self-contained models are shipped from the factory with a completely operational 134A
refrigeration system and require no modifications or adjustments of the system upon
installation.
Remote Models
The remote models are designed to use 134A refrigerant and shipped from the factory with
the evaporator coil, expansion valve, refrigerant solenoid valve, and thermostat. The
thermostat senses interior case temperature and opens and closes the refrigerant solenoid
valve as needed to maintain proper case temperatures. The condensing unit is optionally
supplied from the factory for remote location installation.
