Priming the AromaSteam
1.
Ensure MrSteam fragrance container is full
2.
Press and hold the priming button until liquid fills the suction hose all the way to pump head in
AromaSteam.
3.
Liquid will automatically enter pressure hose when pump is activated from steam room control. It might take
multiple steam sessions to reach steam head, based on length of pressure hose and location of 90
0
T.
IMPORTANT NOTE
: If liquid is not filling tubing in AromaSteam head, release priming button and check if
suction hose is securely installed onto barb fitting below AromaSteam head and check valve.
IMPORTANT NOTE
: If an extended pressure hose is needed, please contact MrSteam Technical Service.
13
I N S T A L L E R S E C T I O N
AromaSteam
Operation and Installation Instructions
®
Steam Head
(Inside Steam Room)
Check Valve
Pressure
Hose 6ft.
Steam Generator
Steam Pipe
90° T
Fragrance
Container
Suction Hose
AromaSteam Pump
Priming Button
Pump Head
®
AROMASTEAM