FeelTech
2
SGP3000 Series Users Manual
◆
High frequency resolution: full range of 10 mHz frequency resolution
；
◆
High amplitude resolution: minimum resolution can be 10 mV.
◆
No range limit: full frequency range without stage, direct digital Settings
◆
Frequency sweep function: It has Linear and Logarithm two sweep types.
Sweep time can be up to 999.99S. Sweep starting point and end point can be set
arbitrarily.
◆
It has pulse train burst output function. There has Manual Trigger and
External Trigger two modes. It can output 1~65536 pulse trains.
◆
It has -10V~+10V DC offset function. The resolution can be 0.01V
；
◆
It has digital signal output function can output any CMOS electric level
with amplitude during 0~10V
；
◆
Save Function
：
It can save 30 sets of user defined parameters and can be
loaded at anytime.
◆
It has built-in 60MHz frequency meter and counter.
◆
All parameter can be adjusted by internal program.
◆
Powerful communication function. The instrument can be controlled by
other equipment through TTL serial port. Communication protocol is open for
secondary development.
◆
High reliability: large scale integrated circuit and SMT technology, high
reliability, long service life.
◆
Output short-circuit protection: All terminals can work more than 60
seconds when the load is short-circuited.
◆
Can choose our FYV2000 series or FPA1000 series power amplifier to
output 20W or higher signals in DC-2MHz width without any distortion. The
highest power can be up to 60W with our FPA1016 amplifier.
