The list includes most of the common cases, but not the results of defective
unit, crafts or materials in the unit.
If all troubleshooting steps have been exhausted and the issue is still
occurring, please feel free to reach out to Fehom Customer Seryice to get
further assistance.
Is the Full Tank indicator blinking?
This product does not apply to
over hot or cold environment, the
machine will automatically enter
the protection mode. It is a normal
phenomenon.
When running under lower
ambient temperature, the machine
will automatically defrost, which is
a normal phenomenon. It will
restart dehumification again until
the defrosting process finished.
It is normal the compressor
ceases while defrosting process.
Wait until the process finished, it
will restart dehumidification again.
Is the room humidity lower or
reaching the preset humidity
level?
(When the room humidity has
reached the preset level, the
dehumidifier will enter Standby
Mode and the indicator on LCD
will flash. )
Please set the humidity by 5%RH
than the room humidity or set the
humidity to 30%RH.
This is to prevent the frequent
start of the machine. Does the
machine stop working just now?
The dehumidifier is designed to
work in the humidity range of 30%-
80%. Above or below this range, it
will not work.
, it
