Flying)
Weight: Main engine -1700g, muffler-65g*2pcs, Ignition-180g
Safety Instructions before starting engines
WARNING!
This engine is not a toy! Serious injury and /or death can
occur from its misuse! READ and become familiar with this
entire instruction manual. LEARN the engine's applications,
limitations, and possible hazards. DLA is not responsible
for any loss, injury or damage resulting from the use of its
products.
1. Keep all spectators at least 30 feet away from the engine
while operating the engine.
2. Do not put anything (e.g. fingers, body parts, objects, et al)
into the rotating propeller
3. Wear proper apparel. Do not wear loose clothing, gloves,
neckties, jewelry, or neck straps
，
which may get caught in
the moving propeller.
4. Always wear eye protection when starting the engine.
5. Inspect engine mount bolts and firewall integrity before
operating the motor.
6. Turn off the engine before making any adjustments.
7. Always use the proper size and well-conditioned propeller.
8. Always use the correct length propeller bolts and make sure
they are tight before every flight.
(Screw thread-locking
glue is necessary)
9. Remember to keep engine fuel in a safe place, away from
any sparks, excessive heat, or anything which could ignite
the fuel.
Remember that gasoline/mixture is highly
flammable and must be handled with extreme caution. Do not
smoke while running or operating the engine.
10. Do not run the engine near loose material such as dirt,
gravel, power cords, ropes, sand, etc.
Loose material can
be drawn into the turning prop causing injury or damage.
Engine installation
1. Make sure each engine comes with a firewall mounting plate
drilled with four holes for #10 size screws.
2. A spacer is needed to keep the cooling fins away from the
firewall where the firewall is larger than the engine plate.
