9
5.MAINTENANCE AND STORAGE
Maintain your tool regularly. This will keep your tool in good working order and extend its
lifespan.
Do not use abrasive, caustic agents to clean the tool. These types of products will damage
your tool.
Do not perform repairs by yourself. Repairs and inspection must be carried out by a
competent person or at an authorized service center (please contact you service dealer).
After each use
Check the blade, cable and body of the tool (cleanliness, wear, damage, etc.). If you notice
damage, wear, or malfunction, do not use the tool and bring it to a qualified service for
inspection and reparation.
Maintenance
There is no specific maintenance to
be performed by the user. After each season, please bring the tool to an authorized service
center to perform a general cleaning and the following operations:
-
Lubrication of the blade
-
Mechanical check of motor, spindle, bearings and housing.
-
Electrical check.
-
Electrical and mechanical performance.
Spare Parts
You can order the spare parts directly from our Service Center. Please place your order
according to the type of the machine and the parts number given in the explosion drawing.
Storage
After use and cleaning, please store your tool.
Store the tool in a clean, dry place, preferably in its box.
During transport and storing always put the protection cover on the blade.
The tool must be stored away from children and pets.
Avoid exposing the tool to direct sunlight.
6. DISPOSAL
Electrical products should not be discarded with household products. According to the
European Directive 2012/19/EC on waste electrical and electronic equipment and its
implementation into national law, electrical products used must be collected separately and
disposed of at collection points provided for this purpose. Talk with your local authorities or
dealer for advice on recycling.
