screws which secure it .
Remove the left and right wheels by removing the snap joints on side of wheels . See Fig.28.
3. Pull out drive shaft. See Fig.29
4. Pull the hex shaft by force, remove the hex shaft and transition shaft assembly off. See Fig. 30.
5. Remove the three screws which secure the friction wheel’s side plates together,change the
rubber ring only. See Fig.31.
6. Slide the friction wheel assembly back onto the hex shaft and follow the steps above in reverse
order to reassemble components.
11. TECHNICAL DATA
Model
FBAE200-2
FBAE200ES-2
Measured sound power level
98.01 dB(A) K= 2,1 dB(A)
98.01 dB(A) K= 2,1 dB(A)
Measured sound pressure level 87,6 dB(A) K= 3 dB(A)
87,6 dB(A) K= 3 dB(A)
Guarantee noise level
100 dB(A)
100 dB(A)
Vibration at the operator
position
3.9/4,8m/s² K=1,5 m/s²
3.9/4,8m/s² K=1,5 m/s²
Net Weight
66 kg
68 kg
Engine power
4,1 kW
4,1 kW
Working width
80 cm (32’’)
80 cm (32’’)
Measurement of the noise emission was made according to requirements of the Directive Machine
2006/42/EC and Noise Emission Directive 2000/14/EC amended by 2005/88/EC.
Fig.28
Fig.29
Fig.30
Fig.31
22
