Pic.17
Chipping branches
4. When finished chipping, turn
OFF
the machine, allow all moving parts to come to a
complete stop, and disconnect the spark plug wire before moving the machine,
emptying the bag, unclogging the inlets or outlets, filling the gas tank, or performing
maintenance and repairs.
Chipping Tips:
⚫
DO NOT feed material in excess of the diameter indicated on the funnel cover into the
funnel. Large branches will cause the motor to stall.
⚫
Chipping wood when it is green is easier on the machine. The blades will stay sharper
longer.
⚫
The chipper/shredder will work best if the blades are sharp. Rotate, sharpen, or replace
the blades as soon as chipper/shredder performance begins to deteriorate.
SECTION 4: MAINTENANCE
Turn OFF the machine, allow all moving parts to come to a complete stop, and
disconnect the spark plug wire before moving the machine, emptying the bag,
unclogging the inlets or outlets, filling the gas tank, or performing maintenance
and repairs.
Warning! There is danger of rotating cutting means; before maintenance and
cleaning, be sure that the rotating cutting means has come to a complete stop.
