8
Instructions
1. Fuel confirmation
Please use No. 90 unleaded gasoline or above!
It is not recommended to use gasoline stored over 2 months!
Please replace or refill the fuel in the open air!
After the replacement, please remain the gasoline engine to be clean !
Make sure that the gasoline is filled to the machine when it is switch off.
Gasoline is harmful to health, please avoid direct contact.
For the first time, it is recommended that the amount of filling should be
550ml~600ml.. Oil standard is 4 stroke 20W-40.
Injection method (read maintenance for reference)
Warning
The cutter head is fixed by special bolts. Please check the tightness of the
cutter and the blade fixing bolts before using.
Check whether there is a foreign object inside the inlet. If there is a foreign
object, please take it out with a tool.
Do not put clothes, tools, etc. on the machine.
Please work in a flat and open area with good ventilation.
Stay away from the outlet direction.
If the machine has abnormal vibration during working, please stop the machine
and send it to the distributor for inspection. Please wear, goggles, ear
protection, labor protection gloves when working.
It is recommended that this machine be operated by professional persons. Do
not put hand into the inlet hopper.
2, Start-up instructions
Please refer to the quick use manual.
Warning
Please use this machine correctly. Please push the branches into the inlet
hopper and the automatic biting system will cut them into pieces.
