10
/ 21
Engine switch
STARTING THE ENGINE
a)
Turn engine switch to ON position.(Fig F)
b)
Press the primer button 3 times. (Fig G)
c)
Pull the recoil starter handle gently until it engages the give it a good strong pull to start
the engine. (Fig H)
Fig F
Fig G
Fig H
TURN THE ENGINE OFF
Turn the engine switch on OFF position, or take out the dustbin.
OPERATIONS
WARNING! Never operate without dustbin; it may be dangerous to your body.
1. TOP HOPPER-FRONT CUT
The large slopping front chute of the top hopper is designed to accept leaves and small
garden clippings. Shredding and mulching is achieved by natural suction of the debris
through the blade chamber. Do not overfeed and do not feed wet, soggy material into the
shredder as this may clog the blade chamber and the discharge chute. (Fig I)
Fig I
2. TOP HOPPER-BACK CHUTE
The smaller back chute of the top Hopper accepts medium to larger size garden clippings.
Shredding and mulching is achieved through the same action as the front chute. If finer
type mulch is required, re-feed the mulch through again until the desired result is
obtained. (Fig J)
