6
with these instructions and only in a
position which is vertical in relation to the
ground . Any other position is dangerous.
Check regularly that the screws are
properly secured.
Before using the machine and after any
impart, shark for signs of wear or damage
and repair as necessary.
Take care against injury form any device
fitted for trimming the filament line
length.After extending new cutter line
always return the machine to its normal
operating position before switching on.
never
use
replacement
parts
or
accessories
not
provided
or
recommended by the manufacturer.
always ensure that ventilation openings
are kept clear of debris.
Never to replace the non-metallic cutting
means with metallic cutting means
Never overreach and keep the balance at
all times, always be sure of the footing on
slopes and to walk, never run
Never touch moving hazardous parts
before the machine is disconnected from
the mains and the moving hazardous parts
have come to a complete stop
There is remain residual risks despite the
inherent
safe
design
measures,
safeguarding
and
complementary
protective measures adopted.
Summary of Contents for FCBE350
Page 14: ...14 B C...
