GB
19
fig.12
Periodically check oil level to ensure it is between 2 grooves around the
dipstick. Upon lower oil level, oil refilling is required.
Warning: Never mix oil with general waste!
Used oil must be disposed of according to current regulations in the
country where the machine is used.
Sharpening the wedge
After using the log splitter for some time, sharpen the wedge of the log splitter
using a fine-toothed file and smooth any burrs or crushed area along the cutting
edge
STORAGE
When you have finish working with your log splitter:
1.
Disconnect the log splitter from the mains supply.
2.
Tighten the oil yank cover / air bleeder,
3.
Clean the unit down using a dry cloth.
4.
Store in a dry and well-ventilated area.
