(Pitc.2)
All the identification references (code number, engine, weight, power)
are printed on the number plate on the machine (Pitc.3).
(Pitc.3)
1) Take the machine out of the carton box.
2) Fit the two tillers to the main shaft using the delivered screws and nuts.
3) Fit the rear spur in its place using the delivered bolt and both pins
which are on the spur holder.
4) Fit the handlebar on the support:
a. The model with the vertical adjustment is fitted with two screws
and nuts already fitted on the handlebar.
b. The model with the full-side adjustment (rack, wheel system) is
fitted with the parts already mounted on the handlebar holder.
5) The front wheel fixed by bolt
（
M12*80
）
,Nut M12. And pull front wheel
till B type axis pin fixed when you do not use front wheelThe wheels
can be adjusted up and
