The safety measures to protect the operator are identified based on an estimation
of exposure in the actual conditions of use.
Noise emission values measured according to relevant standard.
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
Vibration values measured according the relevant standard
Aluminium winding
-
Main handle: 8,540 m/s²
K=1.5 m/s²
-
Auxiliary handle: 7,495 m/s²
K=1.5 m/s²
11
、
STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place,
avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
12
、
ENVIRONMENT
Electrical products should not be discarded with household products. According to the
European Directive 2012/19/EU on waste electrical and electronic equipment and its
implementation into national law, electrical products used must be collected separately and
disposed of at collection points provided for this purpose. Talk with your local authorities or
dealer for advice on recycling.
08
Impact d
rilling into concrete:
-
Sound pressure level = 92,4 dB(A) K= 5 dB(A)
-
Sound power level = 103,4 dB(A) K= 5 dB(A)
Copper winding
No load:
-
Main handle: 8,060 m/s²
K=1.5 m/s²
-
Auxiliary handle: 7,026 m/s²
K=1.5 m/s²
Auminium winding
No load
:
-
Sound pressure level Lpa = 82 dB(A) K= 5 dB(A)
-
Sound power level Lwa = 93 dB(A) K= 5 dB(A)
Copper winding
No load
-
Sound pressure level Lpa = 81,9 dB(A) K= 5 dB(A)
-
Sound power level Lwa = 93,4 dB(A) K= 5 dB(A)
Impact drilling into concrete:
-
Sound pressure level = 92,9 dB(A) K= 5 dB(A)
-
Sound power level = 103,9 dB(A) K= 5 dB(A)
Impact drilling into concrete:
-
Main handle:
6
,
35
0 m/s²
K=1.5 m/s²
-
Auxiliary handle:
5
,
2
95 m/s²
K=1.5 m/s²
Impact drilling into concrete:
-
Main handle:
6
,
085
m/s²
K=1.5 m/s²
-
Auxiliary handle:
5
,
032
m/s²
K=1.5 m/s²
