11
Adjust the working speed by turning the knob on the front handle. We
recommend using a slow speed initially and then accelerating. The MIN marking is
the slowest speed and the MAX marking is the fastest speed.
Sanding
The sander can be used for most sanding operations on materials such as wood,
plastic, metal and painted surfaces.
WARNING
: Don’t use this machine on plaster.
Wear safety goggles and dust mask.
Where possible, secure smaller workpiece to prevent them from moving under
the sander. Lower the sander in contact with the workpiece without pressure and
then start the sander.
Move the sander slowly over the surface of the workpiece, for best results use
the sander in a linear motion not circular. Using the sander in a circular motion
may result in the belt tracking slipping. Sand with the grain, in parallel over
lapping strokes.
To remove paint or smooth very rough wood, sand across the grain at 45º in two
directions, and then finish parallel with the grain. Use the front roller only to sand
corners or irregular shapes.
