14
4. MAINTENANCE
If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
Tools should always be clean, clean up debris and dust.
Always change the oil (gearbox, bearings) for proper operation.
Always check the power cord, plugs, switches to make sure the tools are faultless.
The power tools manufactured by the company undergo a strict quality inspection. If the
machine is faulty, please consult the authorized service centre (SWAP) for repair.
a. Carbon brushes replacement
When the carbon brush reaches its wear limit, replace with a new one. Use a screwdriver
to unscrew the brush cover, remove the original carbon brush, place a new carbon brush
and screw the brush cover.
b. Repairs
There are no repairs to be provided by the user. For inspection and repair, return the tool
directly to a qualified service.
c. Storage
After use and cleaning, store your tool. Store the tool in a clean, dry place. The tool
should be kept away from children and pets.
Avoid exposing the tool to direct sunlight.
5. DISPOSAL
Electrical products should not be discarded with household products. According
to the European Directive 2012/19/EU on waste electrical and electronic
equipment and its implementation into national law, electrical products used
must be collected separately and disposed of at collection points provided for
this purpose. Talk with your local authorities or dealer for advice on recycling.
