EN
or performing any maintenance the saw may be cleaned most effectively using
compressed air. Always wear safety goggles when using compressed air. If
compressed air is not available, use a brush to remove dust and chips from the saw.
2) Motor ventilation vents and switch levers must be kept clean and free of foreign
matter. Do not attempt to clean by inserting pointed objects through openings.
3) Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon
tetrachloride, chlorinated cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to clean the saw.
4) Have an authorized service center examine and/or replace the worn carbon brushes
in the event of excessive parking.
5) Blades become dull even when cutting regular lumber, a sure sign of a dull blade is
the need to force the saw forward instead of guiding it while making a cut. Take the
blade to a service center for sharpening.
6) Keep the machine clean all the time.
7) If you discover any damage, consult the exploded drawing and parts list to
determine exactly which replacement part you need to order from our customer
service department.
8) Clean the housing only with a damp cloth. Do not use any solvents! Dry thoroughly
afterwards .In order to maintain battery capacity ,we recommend the battery to be
completely discharged every one month and fully recharged again .Only store with a
fully charged battery and top-up the charge from time to time if stored for a long
time. Store in a dry and frost-free place, the ambient temperature should not exceed
40°C.
9) If the supply cord of this power tool is damaged, it must be replaced by a similar
cord available through the service organization or a qualified authoritative
technician.
10) For safety reasons, the machine automatically switches off if the carbon brushes are
so worn out that they no longer have contact with the motor. In that case, the
carbon brushes must be replaced by a pair similar carbon brush available through
the after-sales service organization or qualified professional person.
CAUTION:
The brushes must always be replaced in pairs.
CAUTION:
Always disconnect the machine from the power supply before removing any
electrical covers.
15
