7.2 CHANGING BLADES (FIG. Q
–U)
WARNING:
use only cutting blades designed
for this machine.
WARNING:
Wear gloves when changing
blades because of sharp edges. This machine is
equipped with a cutterhead which holds two blades.
For new blades contact SWAP or an authorized
service organization.
WARNING:
Sharp edges.
WARNING:
The blades can be re-sharpened
max. 3 mm down from their original size. If the
blade size has decreased by more than 3mm, the
blades must be replaced. The blades can be re-
sharpened at 42 °.
18
