h) Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were
specially designed for your saw, for optimum performance and safety of operation.
Special safety regulations
Causes and operator prevention of kickback:
- Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an
uncontrolled saw to lift up and out of the workpiece toward the operator;
- When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the
motor reaction drives the unit rapidly back toward the operator;
- If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can
dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward
the operator.
Kickback is the result of saw misuse and/or in corrects operating procedures or conditions and can
be
avoided
by
taking
proper
precautions
as
given
below.
Summary of Contents for FSC20V165
Page 2: ...BUILDER SAS 32 rue Aristide Berg s ZI 31270 Cugnaux France MADE IN PRC 2019...
Page 11: ...3 ASSEMBLY...
Page 12: ......