IDENTIFICATION
ID HyWEAR compact
10 Operation
Page 22 of 41
10.3 Connecting to Host
The flashing blue LED after power-up means that the ID HyWEAR compact is seeking a connection. As long
as no connection to the host has been established, scanning is not possible.
10.3.1 Establishing a WiFi Connection
To connect the ID HyWEAR compact to a host via WiFi an access point is needed. Make sure that both
devices, ID HyWEAR compact and the WiFi access point, have the same settings. For more information
refer to see chapter 11.5 WiFi Settings on page 30.
The following figure explains how to connect the ID HyWEAR compact via WiFi.
Fig. 6: Establishing a WiFi connection
For detailed information, please refer to the Application Note in the FEIG download area, using the following
link and login data:
Username:
hywear-compact
Password:
hywear
10.3.2 Establishing a Bluetooth Connection
Before attempting to connect the ID HyWEAR compact to a host, e.g. a tablet or smartphone, via Bluetooth
make sure that both devices have the same settings. For more information refer to see chapter 11.4
Bluetooth Settings on page 29.
The following figure illustrates how to connect the ID HyWEAR compact via Bluetooth.
Fig. 7: Establishing a Bluetooth connection
For detailed information, please refer to the Application Note in the FEIG download area, using the following
link and login data:
Username:
hywear-compact
Password:
hywear
