IDENTIFICATION
Installation
ID ISC.ANT1520/680-A/-B
FEIG ELECTRONIC GmbH
Page 41 of 82
ID ISC.ANT1520680-A-B User
Manual_M61112-1e-ID-E-
060317.doc
6.4.2 Reading a Serial Number
Step
Action
Note
1
Attach a tag to an antenna
Here to antenna at multi-
plexer output 1
Use adhesive tape, for example
2
Activate antenna 1 with
command: „Function Unit
Commands - Multiplexer“
Parameter:
„Channel Select“
„Cascade Level = 1“
„Output Channel of Input 1
= 1“
3
Confirm with “Send”
4
Select „Test and
Measurement“
5
Select „ISO Inventory“
function and activate by
clicking on „Start“.
The serial number and tag
type will be shown in the
display.
6
Repeat Step 1 to 5 for
every further antenna
