![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-mr102/id-isc-mr102_manual_3890489100.webp)
Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 100 of 153
H01113-4e-ID-B.docx
7.1.11. [0x2A] Lock DSFI
This command locks the DSFID register in one Transponders.
The supported ISO15693 Host commands depend on the different ISO15693 Transponder types,
which are described in chapter
8.3. Supported ISO15693 Host commands for ISO15693 Trans-
REQUEST-DATA
6
7
(8...15)
0x2A
MODE
UID
RESPONSE-DATA (STATUS = 0x95)
7
ISO15693
ERROR
MODE:
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
ADR
ADR:
b000
non-addressed
b001
addressed
b010
selected
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS
= 0x95. See:
ANNEX F: Transponder Error Codes
Note:
This command is only available for ISO15693 Transponders.