![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-mr102/id-isc-mr102_manual_3890489116.webp)
Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 116 of 153
H01113-4e-ID-B.docx
IC manufacturer identifier: 0x08
Chip ID: 1h = 00000001b (Bit 47 - 40 of UID)
Memory organization: 256 x 8 Byte = 16kBit
Number of blocks
256 (user area: 0
– 249)
Block size
8 byte
WR-OPTION
0 or 1
Command
Code
Function
Mode
Comment
non-
addressed
addressed
select
0x01
Inventory
-
-
0x02
Stay Quiet
-
-
0x22
Lock Multiple Blocks
0x23
Read Multiple Blocks
*
Security Status is always
0x00
0x24
Write Multiple Blocks
**
0x25
Select
-
-
0x26
Reset to Ready
0x27
Write AFI
0x28
Lock AFI
0x29
Write DSFID
0x2A
Lock DSFID
0x2B
Get System Information
0x2C
Get Multiple Block Security
Status
*
The Custom Specific Commands Read Multiple Blocks Unlimited [0xA3] will be used automatically by the
Reader. In non addressed Mode only one or two blocks can be read and the parameter DB-Blocksize in
CFG4 should be set to 8.
**
The WR-OPTION will be set automatically by the FEIG Readers if the WR-
OPTION parameter is set to “00:
automatically set”. Up to two blocks of data can be written for one request.