![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-mr102/id-isc-mr102_manual_3890489133.webp)
Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 133 of 153
H01113-4e-ID-B.docx
Command
Code
Function
Mode
Comment
non ad-
dressed
addressed
select
0x01
Inventory
-
-
-
0x02
Stay Quiet
-
-
0x22
Lock Multiple Blocks
WR-OPTION = 0
*
0x32
Extended Lock Multiple
Blocks
WR-OPTION = 0
*
0x23
Read Multiple Blocks
0x33
Extended Read Multiple
Blocks
0x24
Write Multiple Blocks
WR-OPTION = 0
*
0x34
Extended Write Multiple
Blocks
WR-OPTION = 0
*
0x25
Select
0x26
Reset to Ready
0x27
Write AFI
WR-OPTION = 0
*
0x28
Lock AFI
WR-OPTION = 0
*
0x29
Write DSFID
WR-OPTION = 0
*
0x2A
Lock DSFID
WR-OPTION = 0
*
0x2B
Get System Information
0x3B
Extended Get System
Information
0x2C
Get Multiple Block Security
Status
0x3C
Extended Get Multiple
Block Security Status
The WR-OPTION will be set automatically by the FEIG Readers if the WR-OPTION
parameter in
“CFG4 Transponder Parameter” is set to “00: automatically set”
(see the according System Manual).
Note:
Reading / Writing of more than 255 data blocks is currently not supported with this
reader type