![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-mr102/id-isc-mr102_manual_3890489016.webp)
Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 16 of 153
H01113-4e-ID-B.docx
Example 5:
COM-
ADR
Separation
Character
Header
UID
Separation
Character
Data-
Blocks
END Character
COM-
ADR
SEP-CHAR
USR1
USR2
USR3
USR4
UID
SEP-CHAR
DB
USR
1
USR
2
USR
3
Scan-Mode via USB-Interface (HID-Mode):
If an USB-Reader is set to Scan-Mode the reader works like a keyboard. The data will be trans-
ferred as USB Key Code.
Different USB Key Code tables can be loaded into the reader using the demo program ISOStart.
USB Key codes for German and English are available. Other languages can be created by the
user and with the help of ISOStart.
If the number of transmitted user data is too large, only the maximal number of transmitted data will
be sent plus the end character.
Note:
If configuration protocols shall be sent to the Reader while the Scan-Mode is active,
no Transponder should be within the detection range of the Reader during this time.
Only read operations are available with the Scan Mode or Notification Mode.