Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 41 of 153
H01113-4e-ID-B.docx
Extension:
b0:
extension flag disabled, Data from TR-Data2 will not be requested
b1:
extension flag enabled, Data from TR-Data2 will be requested
TR-DATA-2:
Selects the data types for read operation.
Bit
7
6
5
4
3
2
1
0
Function
-
-
-
-
-
-
MAC
-
MAC:
b0:
The MAC-Address of the Reader will be not transmitted.
b1:
The MAC-Address of the reader will be transmitted.
TR-DATA-3:
Selects the data types for read operation.
Bit:
7
6
5
4
3
2
1
0
Function
-
-
-
READ_CO
MPLETE_
BANK
-
-
-
COM
Prefix
COM Prefix: ( Scan Mode only)
(OperatingMode.ScanMode.DataFormat.BusAddressPrefix)
b0:
no COM Prefix is send
b1:
The Reader will transmit the COM-ADR before each data set.
READ_COMPLETE_BANK:
OperatingMode.ScanMode.DataSelector.Mode.Read_Complete_Bank
)
(
OperatingMode.NotificationMode.DataSelector.Mode.Read_Complete_Ban
k
)
If this bit is set the reader will read out all memory blocks from the selected
Memory BANK.
b00
Reader reads out the memory blocks according to the settings
in DB-ADR, DB-N, D-Start and D-LGT.
b01
Reader reads out all blocks of the selected memory bank