OBID
®
classic-pro
Manual
ID CPR30.xx
FEIG ELECTRONIC GmbH
Page 51 of 126
H01114-0e-ID-B.docx
RESPONSE-DATA:
Depending on the Transponder type the response data of the Reader are different as de-
scribed in the following chapters.
6.1.1.1. Response-Data - ISO 14443A (TR-TYPE = 0x04)
Response data of ISO 14443 Type A compliant Transponder:
Case CFG3. ISO14443 FTUR.OPTI = b0 OPT_INFO is disabled
7
8
9
10
11...17 (20)
DATA-SETS
TR-TYPE
TR_INFO
0
UID
Repeated DATA-SETS times
Case CFG3. ISO14443 FTUR.OPTI = b1 OPT_INFO is enabled
7
8
9
10
11...17 (20)
DATA-SETS
TR-TYPE
TR_INFO
OPT_INFO
UID
Repeated DATA-SETS times
TR_INFO
(only ISO 14443A Transponder)
:
This byte represents some information's from the SAK byte as described in ISO14443-3 (
1
.
Bit:
7
6
5
4
3
2
1
0
Function
-
-
L4
-
-
CL3
-
-
CL3:
Displays the UID length of the present Transponder.
b0
The UID is transmitted as a 7 byte field
(Transponder with Cascade Level 1 or Level 2)
b1
The UID is transmitted as a 10 byte field
(Transponder with Cascade Level 3)
L4:
Displays the compliance of the Transponder with ISO 14443-4 according
ISO 14443-3, SAK, b6
b0
Not compliant with ISO 14443-4
b1
Compliant with ISO 14443-4
OPT_INFO
(only ISO 14443A Transponder)
:
Depending on the setting of CFG3.ISO14443 FTUR.OPTI this byte could optional display
further information's about the present Transponder.
It's recommend to use this information if ISO14443-4 Transponder or Transponder
with more the 4 byte UID length should be handled by the reader.
