OBID
i-scan
®
UHF
Installation
ID ISC.ANT.U170/170-EU
FEIG ELECTRONIC GmbH
Page 3 of 13
M21013-3e-ID-B
General information's regarding this document
•
The sign "
" indicates extensions or changes of this manual compared with the former issue.
•
If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or
for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this
may cause faulty operation of the reader.
•
The following figure formats are used:
0...9:
for decimal figures
0x00...0xFF:
for hexadecimal figures,
b0...1
for binary figures.
•
The hexadecimal value in brackets "[ ]" marks a control byte (command).
