background image

OBID

 

i-scan

 ® 

UHF 

Installation 

ID ISC.ANT.U170/170-FCC 

 

FEIG ELECTRONIC GmbH 

Page 5 of 12 

M21014-2e-ID-B 

 

1. Safety Instructions / Warning - Read before start-up ! 

  The device may only be used for the intended purpose designed by for the manufacturer. 

  The operation manual should be conveniently kept available at all times for each user. 

  Unauthorized changes and the use of spare parts and additional devices which have not been 

sold or recommended by the manufacturer may cause fire, electric  shocks or injuries. Such 
unauthorized measures shall  exclude any liability by the manufacturer. 

  The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid 

for the device. The manufacturer shall  not be held legally responsible for inaccuracies, errors, 
or omissions in the manual or automatically set parameters for a device or  for an incorrect 
application of a device. 

  Repairs may only be executed by the manufacturer. 

  Installation, operation, and maintenance procedures should only be carried out by qualified 

personnel. 

  Use of the device and its installation must be in accordance with national legal requirements 

and local electrical codes . 

  When working on devices the valid safety regulations must be observed. 

  When in operation the device in areas covered under FCC 47 CFR Part 15 a minimum separa-

tion of 23 cm between antenna and the human body must be maintained. 

  Special advice for carriers of cardiac pacemakers: 

Although this device doesn't exceed the valid limits for electromagnetic fields you should keep 
a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in 
an immediate proximity of the device respective the antenna for some time. 

Summary of Contents for OBID i-scan ID ISC.ANT.U170/170-FCC













Reviews: