OBID i-scan
®
System-Manual
ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH
Page 33 of 131
H60301-3e-ID-B.doc
SCAN-DATA
selects the data types to be send in the Scan Mode.
Bit:
7
6
5
4
3
2
1
0
Function
Byte
Order
COM-
Prefix
0
0
0
0
DB
UID
Notes:
•
If the bits UID and DB are set to 0, the scan-mode is switched off.
UID
= Serial No.
Setting of this bit activates the output of the UID
b0
Output of the UID inactive
b1
Output of the UID active
DB
= Data Block
Setting of this bit activates the output of a specified data field.
b0
Output of a data field inactive
b1
Output of a data field active
COM Prefix
When this option is on, the Reader will transmit the COM-ADR before each data set.
b0
COM-ADR of the Reader will not transmit
b1
COM-ADR of the Reader will transmit
Byte Order
Defines the Byte Order within frame
b0
MSB first
b1
LSB first
Note:
If the COM Prefix is enabled the COM-ADR will be send in front of the Header
