OBID i-scan
®
Installation
ID ISC.MRU200
FEIG ELECTRONIC GmbH
Page 34 of 52
M70201-4de-ID-B.doc
E
N
G
L
I
S
H
3.1 Cable Glands
The different cable glands are shown in Table 3-1.
Table 3-1: ID ISC.MRU200 cable glands
Cable gland
Size
Clamping Range
in mm (inch)
Description
1
M 16
4,5...10 (0.18...0.39)
Antenna Cable 1
2
M 16
4,5...10 (0.18...0.39)
Antenna Cable 2
3
M 16
4,5...10 (0.18...0.39)
Inputs / Relay / Outputs
4
M 12
3,5...7 (0.14...0.28)
Interface (serial)
5
M 12
3,5...7 (0.14...0.28)
Supply voltage
6
M 25
9...17 (0.35...0.67)
Ethernet Interface (Model –E only)
USB Interface (Model –USB only)
3.2 Seal Caps
The seal caps included in the scope of delivery can be used to close off unused cable fittings. This
is necessary for reaching the IP54 class.
The reducing ring provided is intended for the network connection. The slotted reducer is placed
over the network cable and then fixed in place in the cable gland.
Fig. 3-2: network connection with slotted reducer
